Return to Home Page

Icom IC-PW1
Specifications

Return to PW1

Amateur Amplifiers 

logo

 

PW1 Specifications

General
  • Frequency Coverage (MHz):
    • 1.800 - 1.999
    • 3.500 - 3.999
    • 7.000 - 7.300
    • 10.100 - 10.150
    • 14.000 - 14.350 (revised 5/27/99)
    • 1.8068 - 18.168
    • 21.000 - 21.450 (revised 5/27/99)
    • 24.890 - 24.990* (revised 5/27/99)
    • 28.000 - 28.700* (revised 5/27/99)
    • 50.000 - 54.000 (revised 5/27/99)
    • *Inhibited in the US version.
  • Current Drain:
    • Less than 15 A (max. output at 200 V)
    • Less than 20 A (max. output at 100 V)
  • Usable temperature range: -10C to +40C; +14F to +104F.
  • Power supply requirements: 180 - 264 V AC or 90 - 132 V AC (single phase; 50 / 60 Hz)
  • Duty cycle: Full duty
  • Input connector: SO-239 x 2 (50 ohm)
  • Output connector: SO-239 x 4 (50 ohm)

 

Linear Amplifier
  • Output power:
    • CW, RTTY: 1 kW at 180 - 264 V AC; 500 W at 90 - 132 V AC input
    • SSB 1 kW PEP at 180 - 264 V AC; 500 W PEP at 90 - 132 V AC input
  • Driving power: Max. 100 W
  • Spurious emissions:
    • Less than -60 dB (HF bands)
    • Less than -50 dB (50 MHz)

 

Antenna Tuner
  • Output matching range (tuner switch ON):
    • 16.7 ohms to 150 ohms impedance (HF bands)
    • 20.0 ohms to 125 ohms impedance (50 MHz)
  • Auto tuning accuracy: VSWR 1.5:1 or less
  • Min. required input power: 60 W
  • Insertion loss: Less than 1 dB (after tuning)

 

Supplied Accessories
  • Controller separation cable
  • ACC cables
  • Coaxial cable with PL-259 plugs
  •  
  • Specifications are subject to change without notice.       UR

 


Copyright 2001-2010, Universal Radio, Inc.