|
Frequency Range: |
0 to 32 MHz |
| Receive Modes: |
USB, LSB, CW, AM, Synchronous AM, NFM, DATA |
| Sensitivity: (All measurements are p.d.at 50 ohm input) |
| |
20 kHz : |
1.9µV USB 2.2 kHz filter 10dB S+N/N (1.4µV / RF Preamp ON) |
| |
100 kHz : |
0.73µV USB 2.2 khz filter 10dB S+N/N (0.34µV / RF Preamp ON) |
| |
500 kHz : |
0.50µV USB 2.2 kHz filter 10dB S+N/N (0.18µV / RF Preamp ON) |
| |
1.0 MHz : |
0.52µV USB 2.2 kHz filter 10dB S+N/N (0.19µV / RF Preamp ON)
0.88µV AM 5 kHz filter 10dB S+N/N (0.36µV / RF Preamp ON) |
| |
1.8 MHz : |
0.52µV USB 2.2 kHz filter 10dB S+N/N (0.21µV / RF Preamp ON)
0.95µV AM 5 kHz filter 10dB S+N/N (0.38µV / RF Preamp ON) |
| |
5.0 MHz : |
0.50µV USB 2.2 kHz filter 10dB S+N/N (0.19µV / RF Preamp ON)
0.86µV AM 5 kHz filter 10dB S+N/N (0.35µV / RF Preamp ON) |
| |
14.0 MHz : |
0.58µV USB 2.2 kHz filter 10dB S+N/N (0.23µV / RF Preamp ON)
1.0µV AM 5 kHz filter 10dB S+N/N (0.42µV / RF Preamp ON) |
| |
28.0 MHz : |
0.60µV USB 2.2 kHz filter 10dB S+N/N (0.23µV / RF Preamp ON)
1.0µV AM 5 kHz filter 10dB S+N/N (0.40µV / RF Preamp ON)
1.2µV NFM 10 kHz filter 12dB SINAD (0.48µV / RF Preamp ON) |
| |
32.0 MHz : |
0.68µV USB 2.2 kHz filter 10dB S+N/N (0.24µV / RF Preamp ON) |
|
| Selectivity: |
| Performance of the 445 kHz IF system and ignores effects of the 45 MHz roofing filter and any audio frequency response tailoring. AGC off. |
| |
2.2 kHz |
| |
4.0 kHz |
| |
5.5 kHz |
| |
9.5 kHz |
|
| Memory channels: |
400 |
| Power Consumption: |
15 VDC external adapter, current 300 to 500 mA typical, 1 Amp max. 30 mA on standby. |
| Physical: |
9.4 x 3.7 x 10 inches 4.9 Lbs. (238 x 93 x 277 mm 2.2 kg) |
| |
Specifications are subject to change without notice. |
