Universal M-1200
Specifications
M-1200 Specifications
| RECEPTION MODES | |
| Morse Code | 5 to 120 WPM with Auto ranging |
| RTTY Baudot | 45, 50, 57, 75 and 100 baud (60, 66, 75, 100 and 132 WPM) |
| RTTY Baudot | 40-200 baud non-standard rates |
| SITOR A | ARQTOR, Amtor A |
| SITOR B | FECTOR, Amtor B, NAVTEX |
| ASCII | 110, 150, 300, 600 and 1200 baud. |
| ARQ-M2 | TDM 86, 96 and 100 baud. |
| ARQ-M4 | TDM 172, 192 and 200 baud. |
| ARQ-E | 48, 64, 72, 86, 96, 144 and 192 baud. |
| ARQ-E3 | 48, 64, 72, 86, 96, 100, 192 and 200 baud. |
| FEC-A | 96, 144 and 192 baud. |
| Packet | 300 and 1200 baud. |
| FAX Facsimile | 60, 90, 120 and 240 LPM AM/FM |
| ACARS | 2400 baud. |
| POCSAG | 512 baud. |
| GOLAY | |
| CTCSS [PL] | 41 standard frequencies. |
| DCS [DPL] | 104 standard frequencies. |
| DISPLAY MODES | |
| Normal Modes | ITA-2, Telex or Military alphabets. |
| Literal Mode | Special symbols used to represent normally non-printing characters |
| Databit Mode | Signal display in binary (Ø or 1's) |
| DEMODULATORS | |
| Morse Code | 300 Hz bandwidth, adjustable 500-2500 Hz |
| RTTY | Microprocessor controlled switch capacitor filters |
| INPUTS | |
| Audio Input J2 | Medium Level RCA (or J1 pin 8) 1000 ohm |
| Audio Input J3 | High Level RCA (or J1 pin 9) 10 K ohm |
| Audio Input J4 | Low Level RCA (or J1 pin 5) 100 K ohm |
| OUTPUTS | |
| Video | (internal to computer's display) |
| Scope Output J1 | Space pin 6, Mark pin 7 |
| GENERAL | |
| Board Type | 8 bit ISA full size (13.25 inch) |
| Specifications are subject to change without notice. |