Alinco DR-635T
Specifications
DR-635T Specifications
| General | ||
| Frequency Range: | VHF | TX: 144 - 147.995 MHz |
| RX: 108 - 173.995 MHz, 87.5 - 108 MHz WFM | ||
| UHF | TX: 430 - 449.995 MHz | |
| RX: 335 - 479.9950 MHz | ||
| Operating Mode: | 16K0F3E (Wide Mode), 8K50F3E (Narrow Mode) | |
| Frequency Resolution: | 5, 8.33, 10, 12.5, 15, 20, 30, 50 and 100 kHz. | |
| Antenna: | 50 ohm, unbalanced internal duplexer | |
| Supply Voltage: | 13.8 volts DC | |
| Ground: | Negative | Current Consumption: TX RX |
VHF | TX - 50 watts output 11 amps max. |
| UHF | TX - 35 watts output 11 amps max. | |
| VHF+UHF RX: | 0.6 amps max. | |
| Frequency Stability: | ± 2.5 ppm at 14 to 40 °F | |
| Memories: | 80 VHF, 80 UHF, 40 Free, 1 VHF Call, 1 UHF Call | |
| Dimensions: | 5.5 x 1.6 x 7.3 inches (140x40x185 mm) | |
| Weight: | 2.2 Lbs. (1 kg) | |
| Transmitter | ||
| Power Output: | VHF High: 50 watts, Medium: 20 watts, Low: 5 watt | |
| UHF High: 35 watts, Medium: 20 watts, Low: 5 watt | ||
| Modulation System: | Variable reactance frequency modulation | |
| Spurious: | -60 dB max. | |
| Max. Deviation: | ± 5 kHz | |
| Max. Distortion: | 3% max. (300 - 3000 Hz) @ 60% modulation | |
| Mic. Impedance: | 2K ohm | |
| Receiver | ||
| Sensitivity: | -14dB for 12dB SINAD | |
| Selectivity: | 12 kHz/24 kHz (-6dB/-60dB) | |
| Squelch Sensitivity: | -0.20 dB micro (0.1 µv) or less | |
| AF Output: | 2 watts (8 ohm load) @ 5% distortion | |
| AF Output Impedance: | 8 ohm | |
| Specifications are subject to change without notice. | ||
Send e-mail to dx@universal-radio.com
Copyright 2005-2008, Universal Radio, Inc.