Alinco DR-600T
Specifications
DR-600T Specifications
| General | ||
| Frequency Range: | VHF | TX: 144 - 147.995 MHz |
| RX: 137 - 173.995 MHz | ||
| UHF | TX: 440 - 449.995 MHz | |
| RX: 410 - 469.995 MHz | ||
| Antenna: | Two 50 ohm unbalanced [VHF SO239 & UHF N] | |
| Supply Voltage: | 13.8 volts DC | |
| Ground: | Negative | Current Consumption: TX RX |
VHF | TX - 45 watts output 9.5 amps max. |
| UHF | TX - 35 watts output 10.0 amps max. | |
| VHF+UHF RX: | 1.2 amps max. | |
| Frequency Stability: | ± __ ppm max. | |
| Dimensions: | 150 w x 50 h x 178 d mm / 5.9" w x 2" h x 7" d | |
| Weight: | 1.5 kg / 3.3 lbs. | |
| Transmitter | ||
| Power Output: | VHF High: 45 watts Mid: 10W Low: 5 watts (approx) | |
| UHF High: 35 watts Mid: 8W Low: 4 watts (approx) | ||
| Modulation: | F3E (FM) Variable Reactance | |
| Spurious: | -60 dB max. | |
| Max. Deviation: | ± 5 kHz | |
| Max. Distortion: | 3% max. (300 - 3000 Hz) @ 60% modulation | |
| Mic. Impedance: | 2000 ohm | |
| Receiver | ||
| Receive System: | Double conversion superheterodyne | |
| IF Stages: | VHF: 21.60 MHz / 455 kHz | |
| UHF: 30.825 MHz / 455 kHz | ||
| Sensitivity: | -16dB micro (0.16µv) or less (12 dB SINAD) | |
| Selectivity: | -6 dB: 6 kHz min., -60 dB: 12 kHz max. | |
| Squelch Sensitivity: | -20 dB micro (0.1 µv) or less | |
| AF Output: | 2.5 watts (8 ohm load) @ 5% distortion | |
| AF Output Impedance: | 8 ohm | |
| Specifications are subject to change without notice. | ||
Send e-mail to dx@universal-radio.com
Copyright 2006, Universal Radio, Inc.