Vectronics
DL-2500
Dummy Load

Please see MFJ-265

 

 

 

The Vectronics DL-2500 Dummy Load simulates an accurate 50 Ohm antenna up to 54 MHz, enabling you to test your transmitter without radiating a signal on the air. It can handle up to 2500 watts for short periods (under 1 minute).
Please click here to view power capability chart.

Note: Please install the four supplied resistors inside the DL-2500 before operation.

Specifications

Frequency:	0-60 MHz
Maximum Power:	2500 watts under 60 seconds. Fan on.
VSWR:	less than 1.3:1 at 30 MHz.
Duty Cycle:	10% with fan
Voltage Gradient:	10 kV per inch
Resistor Type:	Dispersed carbon particles fired in a ceramic matrix.
Energy Density:	7000 joules/inch/second.
Dimensions:	8.5 x 4 x 9.25 inches (215x102x242 mm)
Weight:	5 Lbs (2.3 kg)