The MFJ-265 Dummy Load simulates an accurate 50 Ohm antenna up to 54 MHz, enabling you to test your transmitter without radiating a signal on the air.
It can handle up to 2500 watts for short periods (under 1 minute). This dry dummy load features a fan. Requires 12 VDC.
Please click here to view power capability chart.
Note: Please install the four supplied resistors inside the MFJ-265 before operation.
||2500 watts under 60 seconds. Fan on.
||less than 1.25:1 at 30 MHz.
||10% with fan
||10 kV per inch
||Dispersed carbon particles fired in a ceramic matrix.
||8.25 x 4 x 9.5 inches
||5 lbs. (2.3 kg)