IC-9100 Specifications
| General |
- Frequency coverage *1
- RX: 0.03 - 60.000 MHz*2, 136-174 MHz*2, 420-480 MHz*2, 1240-1320 MHz*3
- TX:
- 1.800 - 1.999 MHz
- 3.500 - 3.999 MHz
- 5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz*4
- 7.000 - 7.300 MHz
- 10.100 - 10.150 MHz
- 14.000 - 14.350 MHz
- 18.068 - 18.168 MHz
- 21.000 - 21.450 MHz
- 24.890 - 24.990 MHz
- 28.000 - 29.700 MHz
- 50.000 - 54.000 MHz
- 144.000 - 148.000 MHz
- 430.000 - 450.000 MHz
- 1240.000 - 1300.000 MHz*3
- *1=USA version *2=some freq. bands are not guaranteed. *3 with optional UX-9100 *4 USB only
- Mode: USB, LSB, CW, RTTY, AM, FM, (DV optional)
- Number of memory channels: 297 (396 with UX9100 option installed)
- Antenna connector: SO-239 x 3 and N (50 ohms)]
- Usable temperature range: 0°C to +50°C; +32°F to +122°F
- Frequency stability: less than ±0.5 ppm (1 minute after power ON/0°C to +50°C; +32°F to +122°F)
- Frequency resolution: 1Hz
- Power supply requirement: 13.8 V DC (±15% negative ground)
- Power consumption:
- TX max power 24A
- RX max audio 5.5A
- Dimensions (projections not included): 315(W) x 116(H) x 343(D) mm; 12.4(W) x 4.6(H) x 13.5(D) inches
- Weight: 11 kg; 24.3 lb.
- ACC 1 connector: __-pin DIN connector
- Data 1 connector: _-pin DIN connector
- Data 2 connector: _ connector
- CI-V connector: 2-conductor 3.5 (d) mm (1/8")
- Display: _._ inch (diagonal) mono LCD
|
| Transceiver |
- Output power (continually adjustable):
- SSB/CW/RTTY/FM: 2 - 100 Watts HF/50/144 and 2 - 75 Watts 440 MHz
- AM: 2 - 25 Watts
- Modulation system:
- SSB: PSN modulation
- AM: Low power modulation
- FM: Phase modulation
- Spurious emissions: -70 dB (HF/6 bands), -60 dB (144/440 MHz band)
- Carrier suppression: 40 dB
- Unwanted sideband suppression: 55 dB
- Microphone connector: 8-pin connector (600 ohms)
- ELE-KEY connector: 3-conductor 6.35 (d) mm (1/4")
- KEY connector: 3-conductor 6.35 (d) mm (1/4")
- SEND connector: Phono (RCA)
- ALC connector: Phono (RCA)
|
| Receiver |
- Receive system: Double conversion superheterodyne
- Intermediate frequencies:
- HF/50 MHz
- 1st: 64.455 MHz
- 2nd: 36 kHz
- 144 MHz
- 1st: 10.850 MHz
- 2nd: 36 kHz
- 430/440 MHz
- 1st: 71.250 MHz
- 2nd: 36 kHz
- Squelch sensitivity (Pre-amp ON) HF:
- SSB: Less than 56 µV
- FM: Less than 0.3 µV
- Selectivity (representative value, filter shape at SHARP):
- SSB (BW: 2.4 kHz): More than 2.4 kHz/-6 dB, Less than 3.4 kHz/-40 dB
- CW (BW: 500 Hz): More than 500 Hz/-6 dB, Less than 700 Hz/-40 dB
- RTTY (BW: 500 Hz): More than 500 Hz/-6 dB, Less than 800 Hz/-40 dB
- AM (BW: 6 kHz): More than 6.0 kHz/-6 dB, Less than 10.0 kHz/-40 dB
- FM (BW: 15 kHz): More than 12.0 kHz/-6 dB, Less than 22.0 kHz/-40 dB
- DV (12.5 kHz spacing): More than -50 dB [with optional UT-121]
- Spurious and image rejection ratio: HF/6M More than 70 dB (except IF through on 50 MHz band)
- Spurious and image rejection ratio: 144/430 More than 60 dB
- Spurious and image rejection ratio: 1200 More than 50 dB (with optional UX9100)
- AF output power: More than 2.0 W at 10% distortion with an 8 ohm load
- AF output impedance: 8 ohm
- PHONES connector: 3 conductor 6.35 mm (1/4")
- EXT SP connector: 2 conductor 3.5 mm (1/8") 8 ohms
|
| Antenna Tuner |
- Matching Impedance Range
- HF Bands
- 16.7 to 150 ohms unbalanced (Less than VSWR 1:3)
- 50 MHz Band
- 20 to 125 ohm unbalanced (Less than VSWR 1:2.5)
- Minimum Operating Input: 8 watts (HF bands), 15 watts (50 MHz band)
- Tuning Accuracy: VSWR 1:1.5 or less
- Insertion Loss: Less than 1.0 dB
|
- Specifications are subject to change without notice or obligation. UR
|
|
