910H Specifications
| General |
- Frequency coverage (USA version):
- Rx,Tx: 144.000-148.000 MHz
- Rx: 136.000-174.000 MHz (guaranteed range 144.000-148.000 MHz)
- Rx, Tx: 430.000-450.000 MHz
- Rx, TX: 1240.000-1300.000 MHz {optional}
- Mode: SSB, CW, FM, FM-N (FM-N is not available on 1200 MHz band)
- Frequency stability: ±3 ppm (-10°C to +60°C)
- Frequency resolution: 1 Hz SSB/CW, 1-- Hz FM
- Number of memory channels:328 (39 regular, 1 call, 6 scan edge for each band plus 10 satellite)
- Operating temperature range: -10°C to +60°C; +14°F to +140°F
- Power supply requirement: 13.8 V DC ±15% (negative ground)
- Current drain (at 13.8 V DC)
- Transmit
- Receive
- max. audio: 2.5 A
- stand-by: 2.0 A
- Dimensions:
- 9 1/2(W) X 3 11/16(H) X 9 13/32(D) inches.
- 241(W) X 94(H) X 239(D) mm
- Weight (approx.): 4.5 kg; 10 lb
- Antenna connector
- VHF: SO-239 (50 ohm)
- UHF: Type-N (50 ohm)
|
| Transmitter |
- Output power (continuously adjustable)
- 144 MHz band: 5.0-100 Watts
- 440 MHz band: 5.0-75 Watts
- 1200 MHz band: 1.0-10 Watts {optional}
- Modulation system
- SSB: Balanced modulation
- FM: Variable reactance modulation
- Spurious emission
- 144, 440 MHz band: Less than -60
dB
- 1200 MHz band: Less than -50 dB {optional}
- Carrier suppression: More than 40 dB
- Unwanted sideband: More than 40 dB
- Microphone connector: 8-pin connector (600 ohms)
|
| Receiver |
- Receiver system:
- VHF
- SSB, CW: Single conversion superheterodyne
- FM: Double conversion superheterodyne
- UHF
- SSB, CW: Double conversion superheterodyne
- FM: Triple conversion superheterodyne
- Sensitivity
- SSB, CW: 0.11 µV (at 10 dB S/N)
- FM: 0.18 µV (at 12 dB SINAD)
- Squelch sensitivity
- SSB, CW: 1.00 µV (at threshold)
- FM: 0.18 µV (at threshold)
- Selectivity
- SSB, CW: More than 2.8 kHz/-6dB; Less than 4.2 kHz/-60 dB
- FM: More than 15.0 kHz/-6dB; Less than 30 kHz/-60 dB
- FM-N: More than 6.0 kHz/-6dB; Less than 18 kHz/-60 dB
- Spurious rejection ratio: more than 60 dB
- Audio output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8 ohm load
- RIT variable range
- SSB, CW: More than 1.0 kHz
- FM: More than 5.0 kHz
- External speaker connector: 2-conductor 3.5 mm (1/8 inch) 8 ohm connector X 2 (for main and sub bands)
|
|
