Return to Home Page

Barker & Williamson
HF Trap Dipole
Wire Antennas

Back to Amateur Wire Antenna Index

Discontinued Amateur Wire Antennas 

Barker & Williamson logo

HF Trap Dipole Antennas

Barker & Williamson, established in 1932, is a recognized leader in worldwide in antenna design for high frequency communications. The trap dipoles listed below are made from rugged #14 stranded copperweld wire for strength and conductivity. All antennas handle 1000 watts. SO239 input.

These trap antennas require assembly. You will be required to adjust the antenna wire lengths according to VSWR measurements and solder connections. The more bands covered, the more time consuming this process will be. It must be done with care to ensure satisfactory results. Ninety day limited warranty.

Model Type Meter Bands Length Design Order # List Price Your Price Order
AS-  20 Trap Dipole 20, 15, 10   23 feet (7 m) 3 Trap Sets No longer available
AS-  40 Trap Dipole 40, 20, 15, 10   40 feet (12.2m) 3 Trap Sets No longer available
AS-  80 Trap Dipole 80, 40, 20   78 feet (23.8m) 2 Trap Sets No longer available
AS-160 Trap Dipole 160, 80, 40, 20 137 feet (41.8m) 3 Trap Sets No longer available
AT-  55 Trap Dipole 40, 20, 15, 10   55 feet (16.8m) 1 Trap Set No longer available
AT-110 Trap Dipole 80, 40, 20, 15, 10 110 feet (33.5m) 1 Trap Set No longer available
AXS-  80 Trap Dipole 80, 40, 15   65 feet (19.8m) 1 Trap Set & 1 Coil Set No longer available
AXS-160 Trap Dipole 160, 30   96 feet (29.3m) 1 Coil Set No longer available


Copyright 2000-2008, Universal Radio, Inc.