Icom IC-V82
Specifications
IC-V82 Specifications
| GENERAL | ||||||||||||||||
| Frequency range |
|
|||||||||||||||
| Mode | : F3E, F2D, [F7W optional] | |||||||||||||||
| Number of memory ch. | : 207 (6 scan edges, 1 call) | |||||||||||||||
| Antenna connector | : BNC (50 ohm) | |||||||||||||||
| Power supply | : 7.2 V DC (6.0 —10.3V DC acceptable, Icom's battery pack only) | |||||||||||||||
| Frequency stability | : ±2.5 ppm -10°C to +60°C | |||||||||||||||
| Current drain (at 7.2 V DC) |
|
|||||||||||||||
| Usable temp. range | : -10°C to +60°C; +14°F to +140°F | |||||||||||||||
| Dimensions (projections not included) |
: 54(W) × 139(H) × 36.7(D) mm 21⁄8(W) × 515⁄32(H) × 17⁄16(D)in. |
|||||||||||||||
| Weight | : 390g; 13.8oz (with BP-222N) | |||||||||||||||
| TRANSMITTER | ||||||||||||||||
| Output power (at 7.2 V DC) |
|
|||||||||||||||
| Spurious emissions | : Less than -60 dB | |||||||||||||||
| Max. freq. deviation | : ± 5 kHz/ ± 2.5 kHz (Wide/Narrow) | |||||||||||||||
| Ext. MIC connector | : 3-conductor 2.5(d) mm (1⁄10″)/2.2k ohm | |||||||||||||||
| RECEIVER | ||||||||||||||||
| Receive system | : Double-conversion super heterodyne | |||||||||||||||
| Intermediate frequencies | : 1st 46.35 MHz 2nd 450 kHz |
|||||||||||||||
| Sensitivity (at 12dB SINAD) | : 0.16 µV typ. | |||||||||||||||
| Squelch sensitivity (at threshold) | : 0.11µV typ. | |||||||||||||||
| Selectivity | : more than 55/50dB (Wide/Narrow) typ. | |||||||||||||||
| Inter modulation | : 65dB type. | |||||||||||||||
| Spurious and Image rejection | : 80dB (typical) | |||||||||||||||
| Audio output power | : 300 mW typ. with an 8 ohm load | |||||||||||||||
| Ext SP connector | : 3-connector 3.5 (d) mm (1/8")/8 ohm | |||||||||||||||
| Exp Data connector | : 3-connector 2.5 (d) mm(1/10") | |||||||||||||||
Copyright 2005-2012, Universal Radio, Inc.