Alinco DJ-296T
Specifications
DJ-296T Specifications
| GENERAL | |
| Receive Frequency (original status) | 216 to 250 MHz (F2 F3 only) |
| Transmit Frequency | 222 to 224.995 MHz |
| Frequency Stability | ± 5ppm (-10° to +60°C.) |
| Antenna Impedance | 50 ohm unbalanced |
| Supply Voltage | DC 13.8V rated (6.0V min to 16.0V max) |
| Ground | Negative Ground |
| Transmit Current Consumption (@13 VDC) | 1.2 Amps (5 watts) |
| Receive Current Consumption (@13 VDC) | 200 mA (50 ma squelched, 20 ma battery save) |
| Operating Temperature Range | +14°F to +140°F (-10° to +60°C.) |
| Dimensions (w/o projection) | 2.2 x 4.9 x 1.6 inches (56x124x40 mm) |
| TRANSMITTER | |
| Output power | 4.5 W 13.8 V or (Low=0.?W) |
| Modulation | Variable reactance |
| Max. Deviation | ± 5 kHz |
| Spurious Emission | less than -60db |
| Microphone Impedance | 2k ohms |
| RECEIVER | |
| Selectivity | more than 12 kHz -6db |
| AF out at 10% distort. 13.8V | 280 mW |
| AF impedance | 8 ohms |
| Specifications are subject to change without notice. | |