|Discontinued Meters & Test Equipment|
Power dissipation is time limited by battery capacity: 1 amp/hr @ 150 watts, 3.5 amp/hr @ 125 watts and 100 watts continuous.
USB 2.0 and USB 1.1 compatible.
Accuracy typically better than +- 1% with 10 bit resolution (+-1/1024) of the measurement range.
Measurement ranges: 0-45 amps, 0-5 volts, 5-10 volts and 10 to 50 volts.
Maximum Voltage 48 Volts
Maximum Voltage at a 40 Ampere discharge rate 3.75 Volts
Minimum Voltage .1 Volts
Minimum Voltage to achieve a 40 Ampere discharge rate 3.00 Volts (Battery dependant)
User selected battery cell chemistry, number of cells and test current, with automatic graph setup and scaling.
High performance C8051 based micro controller with built in USB interface and 10 bit A/D conversion.
USB powered, no internal batteries required. Doesn't use the battery being tested to run the CBA or the fan.
Software calculates and recommends safe tests based on the user supplied battery information.
Supplied with USB cable, Powerpole battery test cable, Windows compatible software CD with full documentation.
System ready, and Test in progress LED indicators viewable from across a room.
Automatic voltage shut off at end of test at using a software recommended safe discharge voltage. May be overridden.
Automatic temperature shut off at end of test at using a software recommended maximum temperature. May be overridden or disabled. (requires optional temperature probe)
Graph printing on any standard color or B&W printer.
Battery test label printing on standard 05160 stick-on labels.
Physical: 3.5 H x 2.8 W x 3.6 D inches 16 oz.
Copyright 2004-2005, Universal Radio, Inc.