|Meters & Test Equipment|
Maximum continuous discharge rate: 100 watts
Maximum limited term discharge rate with < 3500 ma-hour battery: 125 watts
Maximum limited term discharge rate with < 1000 ma-hour battery: 150 watts
0-3 amp accuracy: typically better than + - 10 mA (12 bit, NEW! CBA II)
3-40 amp accuracy: typically better than + - 45 mA (10 bit resolution)
0-5 volt accuracy: typically better than + - .005 volts (10 bit resolution)
5-15 volt accuracy: typically better than + - .01 volts (10 bit resolution)
10-60 volt accuracy: typically better than + - .05 volts (10 bit resolution)
Maximum operating voltage: 55 Volts (48 Volt Lead Acid not supported)
Maximum discharge rate: 40 Amps (3.75 Volts at test start)(Battery dependant)
Minimum discharge voltage to maintain 30 Amps .9Volts (Battery dependant)
Minimum Voltage for a 40 Amp discharge: 2 volts at completion of test (Battery dependant)
Minimum recommended discharge rate: 0.1 Amps
Residual current drain, battery connected while not in use: < .003 Amps @ 12 volts
User selected battery cell chemistry, number of cells and test current, with automatic graph setup and scaling.
High performance C8051 based micro controller with built in USB interface and 10 bit A/D conversion.
USB powered; the CBA does not use the battery being tested to run the CBA or the fan.
Software recommends safe tests based on user supplied battery information.
Supplied with: USB cable, Powerpole battery connector and Windows compatible software CD with full documentation.
System ready and Test in progress LED indicators, viewable from across a room.
Automatic voltage shut off at end of test using a software recommended or user selected safe discharge voltage.
Automatic over-temperature shut off at end of test at using a software recommended or user selected maximum temperature.
Optional external magnetic temperature sensor required for temperature measurement and/or battery auto over-temp shutoff.
Internal automatic self protection of over temperature.
Graph printing on any standard color or B&W printer.
Battery test label printing on standard 05160 stick-on labels.
Dimensions: 3.5" H x 2.8" W x 3.6" D.
Weight: 16 oz.
Basic PC requirement: A PC with a Pentium 233 or better, At least an 800 X 600 graphics card and display monitor, XP, Vista 32 or 64 bit, An available USB port, Microsoft .NET framework 3.5 free download.
Powerpole® is a registered trademark of Anderson Power Products, Inc.
Copyright 2009, Universal Radio, Inc.