RF Systems DA4
Distribution Amp

Order #0601
Your Price: $599.95
                 

The RF Systems DA-4 distribution amplifier permits using up to four receivers from one antenna without signal loss and with full isolation. The DA-4 handles signals from 10 kHz to 30 MHz (usable range is 5 kHz to 50 MHz). The DA-4 utilizes five SO-239 jacks (1 input and 4 output). Six month manufacturer's limited warranty. Made in Holland. Click here to view rear panel

Insertion Gain: ± 2 dB (all ports terminated)
Output to Input Isolation: > 65 dB
Isolation Between Outputs: > 22 dB
Required Voltage: 100-130 VAC 50/60 Hz.
Maximum Input/Output Level: 2 volts peak-peak into 50 ohms
Noise Factor: typically 3.5 dB at 30 MHz
Dynamic Range: > 125 dB
Click here for detailed specs.

Appropriate cables for connection to a communications receiver are listed below.

Order #	Item	Description	Price	Order
#2577	Coax Cable	12 inch (30 cm) RG-8X PL-259 to PL-259	$4.49
#2578	Coax Cable	18 inch (45 cm) RG-8X PL-259 to PL-259	$4.99
#2579	Coax Cable	24 inch (61 cm) RG-8X PL-259 to PL-259	$5.49
#2580	Coax Cable	36 inch (91 cm) RG-8X PL-259 to PL-259	$6.49
Other preassembled cables are available.