RF Systems
DX-10 Pro
DC30 Mains Adapter

The RF Systems DX-10 Pro comes with the DC30 Mains Adapter shown above. It feeds the required 12 VDC current up the coax line to the antenna. This mains adapter does not have an ON/OFF switch as it is intended for continuous use. The adapter is double insulated and does not itself need to be grounded. However, the antenna and/or receiver must be grounded. The short length of coax cable terminating in a PL259 would plug into the receiver. The SO-239 output jack would feed the coax cable (not supplied) going to the antenna.

The DC30 has a built-in thermal fuse that will cut power to the antenna in the event of a cable short.