Return to Home Page

AOR AR-ONE
RS232C Ports

Return to AOR AR-ONE

Wideband Receivers  

aor logo

 

AR-ONE RS232C

aor one RS232

You can connect the AR-ONE to the serial port of a computer using an RS-232C serial cable (not supplied) terminating in a 9 pin male connector. The RS-232C parameters may be defined using the CONFIG menu. Baud rates may be set to 4800 or 9600 bps. (8 bit, 2 stop bit, No parity, X parameter ON). Since there are two independent RS-232C ports, it is possible to set an address to facilitate connection of up to 99 AR-ONE's to a single PC.


Copyright 2002-2010, Universal Radio, Inc.