Ecoflex 10 Plus is a flexible, low-loss coaxial cable specifically designed for use up to 8 GHz. Advanced manufacturing techniques combined with the use of a low-loss PE-LLC dielectric yields a foaming rate of more than 70%. This results in very low attenuation. Ecoflex 10 Plus sets standards among flexible coaxial cables. The high flexibility of Ecoflex 10 Plus is guaranteed by a 7-wire Hybrid inner conductor with aluminum core and welded copper shield. Use of proprietary techniques, continuous center conductor calibration and compression as well as the application of a pre coating results in low losses and good impedance matching. Further advantages of the cable include the use of double shielding, which is constructed of overlapping copper foil plus an additional tight woven copper braid. A screening efficiency of > 90 dB @ 1 GHz is realized. The copper foil has an applied PE coating, which prevents foil cracking due to short radius bends. The black PVC sheath of Ecoflex 10 Plus is UV stabilized. In addition to a full compliment of standard connectors, an easy to use solder free N-connector has been specially developed for Ecoflex 10 Plus. The connector installation only takes a few minutes and doesn't require any special tools. Ecoflex 10 Plus is the right choice when a low loss, highly flexible microwave rated cable is required.
Ecoflex 15 Plus is an extremely flexible low-loss 50 Ohm coaxial cable for an operation range up to 8 GHz. Most modern production methods and usage of a low-loss PE-LLC dielectric with a gas proportion of more than 70% allow very favorable loss values. The innovative cable structure of Ecoflex 15 Plus combines the low loss characteristics of 1/2 inch cables with fixed inner conductors with the mechanical attributes of flexible, but high-loss standard-coaxial cables with stranded inner conductor. So this cable represents an ideal combination. The high flexibility of Ecoflex 15 Plus is guaranteed by a 7-wire Hybrid inner conductor with aluminum core and welded copper shield. Using precise production steps, the inner conductor has to be stranded, compressed, calibrated and finally provided with a pre coating, to achieve the excellent values for loss and matching. A further “Plus“ is the double shielding: an overlapping copper foil and a copper braid above ensure a high shielding factor of > 90 dB at 1 GHz. The black PVC outer cover of Ecoflex 15 Plus is UV-resistant. For a simplified installation, SSB has developed solderless "N" connectors requiring no special tools. Ecoflex 15 Plus is a modern coaxial cable for all HF applications. Plus it is low-loss, flexible, stray radiation safe and suitable up into the microwave range.
Copyright 2011-2019, Universal Radio, Inc.