Return to Home Page

Yaesu FIF-232C
CAT Interface


Please check
our Used List

Recently Sold Used

Return to FRG100

Discontinued Receiver Accessories  



Rear Panel

Yaesu FIF232C

The Yaesu FIF-232C CAT is an outboard interface system required by some Yaesu models for interfacing the radio to a serial port of a PC. The FIF-232C converts TTL levels required by the radio to the RS-232C levels required by the computer. There is an input jack on the front and a PTT input jack on the right side. The front panel also has a power On/Off switch and a power LED. The rear panel has a RS-232C DB-25F connector. The FIF232C includes the required cable to most applicable Yaesu radios. However, the user must supply their own standard RS232 serial cable from the Yaesu FIF232C to their PC. This is a standard cable obtainable from most computer suppliers. You will need to note how may pins (such as 9 or 25) on our your serial port to obtain the correct cable.

The FIF232C is 4 x 2 x 4 inches and operates from 117 VAC. Computer control software is not included. Click here to view CAT commands.

Some of the Yaesu models that require this interface include:  FT-650, FT-736, FT-747GX, FT-757GXII, FT-767GX, FT-840, FT-890, FT-990, FT-1000D, FRG-100, FRG-8800 and FRG-9600.

Copyright 2001-2017, Universal Radio, Inc.