IC-2720H Specifications
| General |
- Frequency coverage Transmit (USA Version)
- VHF: 144-148 MHz
- UHF: 440-450 MHz
- Frequency coverage Receive (USA Version)
- Left Side: 118-550 MHz
- Right Side: 118-174, 375-850, 810-999.99 MHz (less cellular)
- Mode: FM, AM* (* U.S.A. version, RX only; 118-136 MHz; not guaranteed.)
- Number of memory channels: 212 (including 2 call and 10 band edge channels)
- Antenna connector: SO-239 (50 ohms)
- Power Supply requirement: 13.8 V DC ±15%
- Useable temperature range: +14 to +140 °F, -10 to +60 °C
- Frequency stability: ±10 ppm
- Tuning step increments: 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz
- Current drain (at 13.8 V DC)
- Receive squelched 1.2 Amps
- Maximum audio output 1.8 Amps
- Transmit at high power VHF 12 Amps, UHF 11 Amps
- Main Unit Dimensions (projections not included):
- 5.5 x 1.65 x 7.4 inches 2.6 Lbs (140x40x187 mm 1.17 kg).
- Controller Dimensions (projections not included):
- 5.5 x 2 x 1.2 inches 6 ounces (140x50x27 mm 150 g).
|
| Transmitter |
- Output power:
- VHF 50 W, 15 W, 5 W selectable
- UHF 35 W, 15 W, 5 W selectable
- Modulation system: variable reactance frequency modulation
- Max. frequency deviation: ±5.0 kHz
- Spurious emissions: Less than -60 dB
- Microphone connector: 8-pin modular jack (600 ohms)
|
| Receiver |
- Receive system: Double conversion superheterodyne
- Intermediate frequencies (Left/Right): 1st 38.85/450 kHz 2nd 46.05 MHz/455 kHz
- Sensitivity: Less than 0.18 micro V for 12dB SINAD
- Squelch Sensitivity: 0.13 micro V (at threshold)
- Selectivity:
- More than 12 kHz -6 dB
- Less than 30 kHz -60dB
- Spurious rejection ratio: More than 60 dB
- Audio output (at 13.8 V DC): More than 2.4 W at 10% distortion with an 8-ohm load
- Ext. speaker connector: 2-conductor 1/8" (3.5 mm), 8 ohms
- Specifications are subject to change without notice or obligation.
|
|
