Kenwood
TM-D710A
Specifications
TM-D710A
| GENERAL | |
| Antenna Impedance | 50 Ohms | Current Receive Drain (approx.) | < 1.2A (VHF/UHF) | Current Transmit Drain (approx) | HI (50W (VHF), 50W (UHF): < 13.0A (VHF), 13.0A (UHF) MID 10W: < 5.5A (VHF), 6.5A (UHF) LOW 5W: < 5.0A (VHF), 5.0A (UHF) |
Dimensions (W X H x D) | 5.6 x 1.72 x 5.68 inch (140 x 43 x 142 mm) |
Frequency (UHF) | TX: 430-450 MHz RX: 136-175 MHz 300-524 MHz 800-1300 MHz (less cellular) TX (SUB VHF): 144-148 MHz |
Frequency (VHF) | TX: 144-148 MHz RX: 118-470 MHz TX (SUB UHF): 438-450 MHz |
Frequency Stability | ±5ppm (+14° - +122°F) (-10° - +50°C) |
Mode | F1D, F2D, F3E | Operating Temperature Range | -4° - +140°F | Power Requirement | DC 13.8V ±15% (minus) | Weight | Body: 2.6 lbs. (1.2 kg) Panel: 0.7 lbs. (300 g) |
| RECEIVER | |
| Circuitry | Double Super Heterodyne | Intermediate Frequency | 1st IF: 35.05 MHz (Band A), 49.95 (Band B) 2nd IF: 455 kHz (Band A), 450 kHz (Band B) |
Selectivity | -6 dB: More than 11 kHz -40 dB: Less than 30 kHz |
Sensitivity (12 dB SINAD) | Click here | Squelch Sensitivity | Less than 0.1 µV (VHF/UHF) |
| TRANSMITTER | |
| Maximum Frequency Deviation | Less than ±5 KHz | Modulation | Reactance modulation | Modulation Distortion | Less than 3% (300Hz - 3kHz) | Modulation Impedance | 600 Ohms | RF Output Power | HI: 50W MID: 10W LOW: 5W |
Spurious Radiation | Less than -60 dB | Specifications may be changed without notice. |
Copyright 2007-2017, Universal Radio, Inc.