ID-880H Specifications
| General |
- Frequency coverage Transmit (USA Version)
- VHF: 144-148 MHz
- UHF: 430-450 MHz
- Frequency coverage Receive (USA Version)
- 118-174, 230-550, 810-999.99 MHz (less cellular)
- Mode: F2D, F3E, F7W
- Number of memory channels: 1052 (including 2 call and 50 prgoram scan edge channels)
- Antenna connector: SO-239 (50 ohms)
- Power Supply requirement: 13.8 V DC ±15%
- Useable temperature range: +14 to +140 °F, -10 to +60 °C
- Frequency stability: ±2.5 ppm
- Digital transmission speed: 4.8kbps
- Voice coding speed: 2.4kbps
- Tuning step increments: 5, 10, 12.5, 15, 20, 25, 30, 50, 100 and 200 kHz
- Current drain (at 13.8 V DC)
- Receive squelched 1.2 Amps
- Maximum audio output 1.2 Amps
- Transmit at high power VHF 11.5 Amps, UHF 12.5 Amps
- Main Unit Dimensions (projections not included):
- 5.5 x 1.75 x 7.6 inches 3 Lbs (150x40x199 mm 1.3 kg).
|
| Transmitter |
- Output power:
- VHF 50 W, 15 W, 5 W selectable
- UHF 50 W, 15 W, 5 W selectable
- Modulation system: variable reactance frequency modulation and GMSK
- FM Wide Max. frequency deviation: ±5.0 kHz
- FM Narrow Max. frequency deviation: ±2.5 kHz
- Spurious emissions: Less than -60 dB
- Microphone connector: 8-pin modular jack (600 ohms)
|
| Receiver |
- Receive system: Double conversion superheterodyne
- Intermediate frequencies: 1st 46.35 MHz, 2nd 450 kHz
- Sensitivity: Less than 0.18 micro V for 12dB SINAD
- Squelch Sensitivity: 0.13 micro V (at threshold)
- Selectivity :
- More than 12 kHz -6 dB
- Less than 30 kHz -60dB
- Spurious rejection ratio: More than 60 dB
- Audio output (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8-ohm load
- Ext. speaker connector: 2-conductor 1/8" (3.5 mm), 8 ohms
- Specifications are subject to change without notice or obligation.
|
|
