Yaesu FT-90
Specifications
| GENERAL | ||||
|
Frequency Ranges: RX:
|
100-230 MHz, 300-530 MHz, 810-999.975 MHz (Cellular Blocked) |
|||
|
TX:
|
144-148 MHz (2M) | |||
|
0
|
430-450 MHz (70CM) | |||
|
Channel Steps:
|
5/10/12.5/15/20/25/50 kHz | |||
|
Emission Type:
|
F3, F2, F1 | |||
|
Antenna Impedance:
|
50 Ohm, Unbalanced (Antenna Duplexer built-in) | |||
|
Frequency Stability:
|
±5 ppm (-5°C to +60°C) | |||
|
Operating temp range:
|
-20°C to +60°C | |||
|
Supply Voltage:
|
DC 13.8V ±15%, Negative Ground | |||
|
Current Consumption:
|
300mA (Receive, Squelched) | |||
|
0
|
9.5A (TX, 144 MHz) | |||
|
0
|
8.5A (TX, 430 MHz) | |||
|
Case Size: |
3.9"(W) x 1.2" (H)x 5.4"(D), 100 x 30 x 138 mm (w/o knobs) | |||
|
Weight:
|
1.42 lbs. (644g) | |||
|
0 | ||||
|
TRANSMITTER
|
||||
|
RF Power Output: |
50/20/10/5 Watts (144 MHz) | |||
|
0 |
35/20/10/5 Watts (430 MHz) | |||
|
Modulation Type: |
Variable Reactance | |||
|
Maximum Deviation:
|
±5 kHz | |||
|
Spurious Emissions:
| At least 50 dB below fundamental | |||
|
Microphone Impedance: |
2 K Ohm | |||
|
0
|
||||
|
RECEIVER
|
||||
|
Circuit Type: |
Double-Conversion Superheterodyne | |||
|
Intermediate Frequencies: |
40.05 MHz and 455 kHz | |||
|
Sensitivity: |
0.16uV @ 12 dB SINAD | |||
|
Selectivity: |
12 kHz/24 kHz (-6 dB/-60 dB) | |||
|
AF Output:
|
2 Watts @ 8 Ohm for 10% THD | |||
|
AF Output Impedance: |
4 - 16 Ohm | |||
| 0 | ||||
| Specifications are subject to change without notice, and are guaranteed within amateur bands only. | ||||
| Frequency ranges and repeater shift vary according to transceiver version; check with your dealer | ||||
Copyright 1999-2019 Universal Radio, Inc.