
207H Specifications
General |
- Frequency coverage (Unit: MHz)
- VHF: Tx: 144-148, Rx: 118-174 (Guaranteed 144-148)
- UHF: Rx/Tx: 440-450
- Mode: FM, AM* (* U.S.A. version, RX only; 118-136 MHz; not guaranteed.)
- Number of memory channels: 182 (150 regular, 2 call, 10 scan edges and 20 scratch pads)
- Antenna connector: SO-239 (50 ohms)
- Power Supply requirement : 13.8 V DC +/-15%
- Useable temperature range : +14°F to +140°F, -10°C to +60°C
- Frequency stability: +/-10 ppm
- Tuning step increments: 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz
- Current drain (at 13.8 V DC)
- Receive squelched 0.8 Amps
- Maximum audio output 1.0 Amps
- Transmit at high power VHF 12 Amps, UHF 11 Amps
- Dimensions (projections not included):
- 5 1/2 (W) x 1 9/16 (H) x 7 5/16 (D) inches
- 140(W) x 40(H) x 185.4(D) mm
- Weight: Approx. 2.6 lbs. (1.17 kg)
|
Transmitter |
- Output power:
- VHF 50 W, 20 W, 10 W, 5 W selectable
- UHF 35 W, 20 W, 10 W, 5 W selectable
- Modulation system: variable reactance frequency modulation
- Max. frequency deviation: +-5.0 kHz
- Spurious emissions: Less than -60 dB
- Microphone connector: 8-pin modular
jack (600 ohms)
|
Receiver |
- Receive system: Double conversion superheterodyne
- Intermediate frequencies: 1st 46.05 MHz, 2nd 450 kHz
- Sensitivity: Less than 0.18 micro V for 12dB SINAD
- Squelch Sensitivity: 0.13 micro V (at threshold)
- Selectivity :
- More than 12kHz/ -6 dB
- Less than 30 kHz/ -60dB
- Spurious rejection ratio: More than 60 dB
- Audio output (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8-ohm load
- Ext. speaker connector: 2-conductor 3.5(d) mm (1/8")/ 8 ohms
- Specifications are subject to change without notice or obligation.
|
|