Yaesu FT-1900R
Specifications
FT-1900R Specifications
| GENERAL | |
| Frequency Range Receive:
|
136-174 MHz, 144-146 MHz. |
|
Frequency Range Transmit:
|
144-148 MHz |
|
Channel Steps:
|
5/10/12.5/15/20/25/50/100 kHz |
|
Frequency Stability:
|
Better than ±10 ppm (-20°C to +60°C) |
|
Mode of Emission:
|
F2D/F3E |
|
Antenna Impedance:
|
50 Ohm, Unbalanced |
|
Operating temp range:
|
-4° to +140°F (-20°C to +60°C) |
|
Supply Voltage:
|
DC 13.8V ±10%, Negative Ground |
|
Current Consumption (typical):
|
0 |
|
RX: |
Less than 0.7A (max. audio) |
|
0 |
Less than 0.3A (Squelched) |
|
TX: |
11A (55W) / 7A (25W) / 5A (10W) / 4A (5W) |
|
Operating Temperature Range:
|
-20°C to +60°C (-4°F to +140°F) |
|
Case Size: |
5.8 x 1.6 x 5.8 inches (w/o knobs) |
|
0
|
140(W) x 40(H) x 146(D) mm |
|
Weight: |
2.6 lb. (1.28kg) |
|
0 | |
| TRANSMITTER | |
|
RF Power Output:
|
55/25/10/5 Watts |
|
Modulation Type:
|
Variable Reactance |
|
Maximum Deviation: |
±5 kHz / ±2.5 kHz |
|
Spurious Radiation:
|
Better than -60dB |
|
Microphone Impedance: |
2 K Ohm |
|
0 | |
| RECEIVER | |
|
Circuit Type: |
Double-Conversion Superheterodyne |
|
Intermediate Frequencies: |
21.7 MHz and 450 kHz |
|
Sensitivity (12dB SINAD): |
Better than 0.2uV |
|
Selectivity: (-6/-60 dB): |
12 kHz/28 kHz |
|
IF Rejection:
|
Better than 70 dB |
|
Image Rejection:
|
Better than 70 dB |
|
Maximum AF Output: |
3 W into 4 Ohm @ 10% THD |
| 0 | |
| Specifications are subject to change without notice, and are guaranteed within amateur bands only. | |
| Frequency ranges and repeater shift vary according to transceiver version. | |
Copyright 2009-2017, Universal Radio, Inc.