Alinco DR-605TQ
Specifications
DR-605TQ Specifications
| General | ||
| Frequency Range: | VHF | TX: 144 - 147.995 MHz |
| RX: 136 - 173.995 MHz | ||
| UHF | TX: 430 - 449.995 MHz | |
| RX: 420 - 470.000 MHz | ||
| Antenna: | 50 ohm, unbalanced internal duplexer | |
| Supply Voltage: | 13.8 volts DC | |
| Ground: | Negative | Current Consumption: TX RX |
VHF | TX - 50 watts output 11.5 amps max. |
| UHF | TX - 35 watts output 10.0 amps max. | |
| VHF+UHF RX: | 1.2 amps max. | |
| Frequency Stability: | ± 10 ppm max. | |
| Dimensions: | 140 w x 40 h x 176 d mm / 5.51" w x 1.57" h x 6.9" d | |
| Weight: | 1.1 kg / 2.43 lbs. | |
| Transmitter | ||
| Power Output: | VHF High: 50 watts Low: 5 watts (approx) | |
| UHF High: 35 watts Low: 5 watts (approx) | ||
| Modulation: | F2E, F3E (FM) Reactance Modulator | |
| Spurious: | -60 dB max. | |
| Max. Deviation: | ± 5 kHz | |
| Max. Distortion: | 3% max. (300 - 3000 Hz) @ 60% modulation | |
| Mic. Impedance: | 2000 ohm | |
| Receiver | ||
| Receive System: | Double conversion superheterodyne | |
| IF Stages: | VHF: 21.70 MHz / 450 kHz | |
| UHF: 30.85 MHz / 455 kHz | ||
| Sensitivity: | -16dB micro (0.16µv) or less (12 dB SINAD) | |
| Selectivity: | -6 dB: 12 kHz min., -60 dB: 28 kHz max. | |
| Squelch Sensitivity: | -20 dB micro (0.1 µv) or less | |
| AF Output: | 2 watts (8 ohm load) @ 5% distortion | |
| AF Output Impedance: | 8 ohm | |
| Specifications are subject to change without notice. | ||
Copyright 2002-2010, Universal Radio, Inc.