Alinco DR-110T
Specifications
DR-110T Specifications
| General | ||
| Frequency Range: | TX: 144 - 147.995 MHz | |
| RX: 144 - 147.995 MHz | ||
| Antenna Jack: | 50 ohm, unbalanced single SO239 | |
| Supply Voltage: | 13.8 volts DC | |
| Ground: | Negative | Current Consumption: | Transmit | 9.5 amps max. |
| Receive: | 0.5 amps max. | |
| Dimensions: | 5.5 x 2 x 6.75 inches (140x40x149mm) | |
| Weight: | 2.42 lbs. (1.1 kg) | |
| Transmitter | ||
| Power Output: | High: 45 watts Low: 5 watts | |
| Modulation: | F3E (FM) Variable Reactance | |
| Spurious: | -60 dB max. | |
| Max. Deviation: | ± 5 kHz | |
| Mic. Type: | Electret Condenser | |
| Receiver | ||
| Receive System: | Double conversion superheterodyne | |
| IF Stages: | 10.7 MHz / 455 kHz | |
| Sensitivity VHF: | -15dB micro or less (12 dB SINAD) | |
| Selectivity: | -6 dB: 6 kHz min., -60 dB: 15 kHz max. | |
| AF Output: | 1.5 watts (8 ohm load) @ 5% distortion | |
| AF Output Impedance: | 8 ohm | |
| Specifications are subject to change without notice. | ||
Copyright 2010-2016, Universal Radio, Inc.