![]() ![]() AOR ARD9000Mk2 Discontinued
Previous Models:
|
Discontinued Amateur Radio Accessories | |||||||||||||||||||||||||||||||||||||||||||||||||||
![]()
The AOR ARD9000Mk2 Digital Voice Interface lets you explore the world of digital communications with your existing transceiver. This device uses the same audio frequencies (300 - 2500 Hz) as microphone audio. The open published (G4GUO) digital protocol means use of the ARD9000 is permitted on the U.S. amateur bands. The ARD9000Mk2 automatically recognizes incoming digital signals and starts decoding those signals immediately. Enjoy near-FM quality audio using SSB! And the best news is that you keep your ability to communicate in conventional analog mode as you can easily shift between digital and analog operation. No rig modifications are required. The ARD9000MkII is also fully compatible with the ARD9800 and the original ARD9000. The ARD9000MkII even comes with an improved 8 pin PTT speaker-mic. Adjust the level via the bottom panel. The ARD9000MkII also comes with speaker cable, DC power cable, magnetic mount base and 8 pin metal plug. You simply make connection to your transceiver's mic input and speaker output. See preassembled cables below that plug into the back panel. [Note: you will have to construct a cable into your radio's mic jack or purchase one below].
Special Note: AOR also did offer the ARD9800 which additionally supported image transmission.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright 2006-2020, Universal Radio, Inc. |