Maha MH-C9000
AA/AAA Cell Charger

 Not currently stocked 

 

 

 

The Maha MH-C9000 is like having four charger-analyzers for AA and AAA NiMH / NiCD batteries. It has a large backlit LCD that shows: capacity, voltage, time and current. It features almost endless programming possibilities with 29 selectable charging and discharging rates. Charging current from 0.2A to 2.0A and discharging current from 0.1A to 1.0A in 0.1A increments. The MH-C9000 has five modes of operation:
Charge: Recharges the battery at the selected rate. Suitable for batteries used frequently.
Refresh & Analyze: Charges the battery, rest for one hour, discharge, rest again, then recharges it. Selectable charging and discharging rate. Suitable for batteries stored for more than two weeks but less than 3 month or those showing poor performance.
Break-In: Also known as IEC capacity measurement and "Battery Forming". Charges battery at 0.1C for 16 hours, rest for one hour, discharges battery at 0.2C, then recharges again at 0.1C for 16 hours. This is suitable for new batteries and those stored for more than 3 month.
Discharge: Discharges the battery at the selected rate.
Cycle: Performs charge-discharge cycle for up to 12 times with discharge capacity stored in memory. Recharges battery after final cycle.

This device provides new ways to take care of your batteries and maximize runtime!
performance.
Battery Matching
In most devices, usually two or more batteries are used together. When batteries are used in a series, the performance is limited by the worst one. In other words, one poorly performing battery can significantly reduce the device runtime. Battery matching refers to grouping batteries with similar “actual” capacity. To perform this, use the Refresh & Analyze mode to determine the battery capacity. Group batteries with capacity within about +/- 5% of the rated capacity.
performance.
Battery Forming
New batteries and those stored for extended period become chemically deactivated. Battery forming is a charge-discharge-charge cycle which forces a full charge into the battery at a very slow rate. This process activates the battery. In certain cases, it needs to be repeated two or three times. Battery forming can be performed using the Break-In mode.

Your MHC9000 always delivers just the right charge and independent negative delta V, temperature and timer protection eliminates over and undercharging. It has a super light travel worldwide power supply and 12V compatible. Worldwide 100-240V switching adapter - light weight and small. Also compatible with 12V input. Batteries shown in photo above, not included. We do stock the Maha MHRAA4 2700 mAh NiMH AA cells in a 4-packs (sold separately - see below).

Order #	Item	Description	Price	Order
#3869	MHRAA4	Maha Powerex Nickel Metal Hydride AA cells 4 Pack (1.2 V 2700 mAh)   MH4AA-270	$13.95