IC-7600 Specifications
| General |
- Frequency coverage
- RX: 0.03 - 60.000 MHz *1, *2
- TX:
- 1.800 - 1.999 MHz
- 3.500 - 3.999 MHz
- 5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz
- 7.000 - 7.300 MHz
- 10.100 - 10.150 MHz *2
- 14.000 - 14.350 MHz *2
- 18.068 - 18.168 MHz *2
- 21.000 - 21.450 MHz *2
- 24.890 - 24.990 MHz *2
- 28.000 - 29.700 MHz *2
- 50.000 - 54.000 MHz *2
- *1=some freq. bands are not guaranteed. *2=Depending on version
- Mode: USB, LSB, CW, RTTY, PSK31, AM, FM
- Number of memory channels: 101 (99 regular, 2 scan edges)
- Antenna connector: SO-239x2 and phono [RCA;(50 ohms)]
- Usable temperature range: 0°C to
+50°C; +32°F to +122°F
- Frequency stability: less than ±0.5
ppm (1 minute after power ON/0°C to +50°C; +32°F to +122°F)
- Frequency resolution: 1Hz
- Power supply requirement: 13.8 V DC (±15% negative ground)
- Power consumption:
- TX max power 23A
- RX standby 3.0A (typ.)
- RX max audio 3.5A (typ.)
- Dimensions (projections not included):
340(W) x 116(H) x 280(D) mm; 13.37(W) x 4.5(H) x 11.2(D) inches
- Weight: 10 kg; 25 lb.
- ACC 1 connector: 8-pin DIN connector
- ACC 2 connector: 7-pin DIN connector
- CI-V connector: 2-conductor 3.5 (d) mm (1/8")
- Display: 5.8 inch (diagonal) TFT color LCD
|
| Transceiver |
- Output power (continually adjustable):
- SSB/CW/RTTY/PSK31/FM: 2 - 100 Watts
- AM: 1 - 30 Watts
- Modulation system:
- SSB: PSN modulation
- AM: Low power modulation
- FM: Phase modulation
- Spurious emissions: -50 dB (HF bands),
-60 dB (50 MHz band)
- Carrier suppression: 40 dB
- Unwanted sideband suppression: 55 dB
- delta TX variable range: ±9.999 kHz
- Microphone connector: 8-pin connector (600 ohms)
- ELE-KEY connector: 3-conductor 6.35 (d) mm (1/4")
- KEY connector: 3-conductor 6.35 (d) mm (1/4")
- SEND connector: Phono (RCA)
- ALC connector: Phono (RCA)
|
| Receiver |
- Receive system: Double conversion superheterodyne
- Intermediate frequencies:
- 1st: 64.455 MHz
- 2nd: 455 kHz
- Squelch sensitivity (Pre-amp ON):
- SSB: Less than 3.2 µV
- FM: Less than 0.3 µV
- Selectivity (representative value, filter shape at SHARP):
- SSB (BW: 2.4 kHz): More than 2.4 kHz/-6 dB, Less than 2.8 kHz/-60 dB
- CW (BW: 500 Hz): More than 500 Hz/-6 dB, Less than 700 Hz/-60 dB
- RTTY (BW: 350 Hz): More than 350 Hz/-6 dB, Less than 650 Hz/-60 dB
- AM (BW: 6 kHz): More than 6.0 kHz/-6 dB, Less than 15.0 kHz/-60 dB
- FM (BW: 15 kHz): More than 12.0 kHz/-6 dB, Less than 20.0 kHz/-60 dB
- Spurious and image rejection ratio: More than 70 dB (except IF through on 50 MHz band)
- AF output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8 ohm load
- RIT variable range: ±9.999 kHz
- PHONES connector: 2-pin connector 6.35 (d) mm (1/4")
- EXT SP connector: 2-pin connector 3.5 (d) mm (1/4")/8 ohms
|
| Antenna Tuner |
- Matching impedance range:
- 16.7 - 150 ohms unbalanced *1 (HF bands)
- 20 - 125 ohms unbalanced *2 (50 MHz band)
- *1=Less than VSWR 3:1; *2=Less than VSWR 2.5:1
- Minimum operating input power: 8 Watts
- Tuning accuracy: VSWR 1.5:1 or less
- Insertion loss: Less than 1.0 dB(after tuning)
- Specifications are preliminary are subject to change without notice or obligation. UR
|
|
