|Amateur HF Transceiver Options|
The Icom RS-BA1 v2 IP Remote Control Software allows you to use an Icom compatible radio installed in another room using your home network or even from a remote location over the Internet. Most functions and modes of your Icom compatible transceiver can be controlled, including interference rejection functions and IF filter settings. Low voice latency (caused by the RS-BA1) provides the same operational experience as using an actual radio. The S-Meter and SWR can even be observed.
With the RS-BA1 Version 2, you can use the dualwatch operation and spectrum scopes with waterfall function as well as observe the MAIN and SUB spectrum scopes. The RS-BA1 Version 2 can also enlarge the panel size (normal or large is selectable), [MUTE] buttons added, clickable indicators to change settings, SUB dial added and RIT tuning knob & TX functions added. The RS-BA1 Version 2 can also still be used with single-receiver transceivers. Shown above in use with a dual-receive transceiver.
The RS-BA1 Windows® CD consists of two component software applications:
The IC-7800 can be connected to a PC via a USB cable and the input/output audio signal and CI-V command is sent through the USB cable.
The exact capabilities of this device varies by radio model.
Copyright 2019, Universal Radio, Inc.