Return to Home Page

Icom AG series
Mast Preamps

Return to 9100

Discontinued Amateur Preamps 

ICOM Preamp

Icom offers a variety of optional weatherproof, mast-mounted preamplifiers for use with select Icom transceivers. These preamplifiers improve S/N ratios and receiver sensitivity to improve DX communications. No power cable wiring is necessary since the coaxial cable is also used to carry the DC voltage and T/R switching signals. A low noise-figure and high gain GaAs-FET is incorporated to provide excellent performance as a low-noise microwave amplifier. The durable acrylic plastic cover and stainless steel mounting hardware ensures years of dependable service. Please carefully check your Icom transceiver owner's manual, and the chart below, to verify the preamp is compatible with your particular model.

The input and output impedance on all models 50 ohms. These preamps will mount on any mast (not supplied) between 1 and 2.3 inches (26-60 mm).

Order # Model Freq. Range Gain Current Max Power I/O List Price Your Price Order
  AG-    25   144-  148 MHz 15 dB 200 ma 100 watts SO239 Discontinued
  AG-    35   430-  450 MHz 15 dB 200 ma 100 watts N Discontinued
  AG-1200 1240-1300 MHz 10 dB 200 ma   15 watts N Discontinued

Model Compatible Icom Transceivers
AG-    25 271H, 275A/H, 820H, 910H, 970A/H, 9100
AG-    35 471H, 475A/H, 820H, 821H, 910H, 970A/H, 9100
AG-1200 910H (+UX910), 970A/H, 1271A

Copyright 2010-2019 Universal Radio, Inc.