LDG RT/RC-100
Remote Tuner
with Controller

  Not in stock  

Previous Model:
RT-100

 

Specifications | Larger View | Hook Up

The LDG RT/RC-100, is a 100 watt coax in / coax out remote tuner system designed to be placed near the feed point of the antenna. This new RT/RC-100 configuration includes the RT-100 outdoor tuner AND the RC-100 remote control unit. If you are worried about power loss due to SWR in your feed line, the RT/RC-100 is the answer. Place the RTC-100 near the feed point and the virtually eliminate all feedline loss due to SWR.

The LDG RT/RC-100 system includes the RC-100 remote controller for the RT-100. The RC-100 will transmit DC power up the coax line as well as control for Auto/Semi mode, Lock and force a Manual Tune. The rear panel of the RC-100 has two SO-239 jacks and the 12 VDC power input jack. A DC power cord is included, but you must provide the 12 VDC power source. Includes U-bolt for pipe mounting on tower or mast.

Specifications:
* Continuous coverage 1.8 to 54 MHz
* Power rating: 0.1 to 100 watt power range (SSB and CW), 30 watt digital.
* 2000 memories
* Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
* Tunes 4 to 800 ohm loads (16 to 150 on 6 meters), 16 to 3200 ohms with optional 4:1 Balun.
* Power requirements: 12 VDC at 500 mA
* RT100 Enclosure: 6 x 2.5 x 6.5 inches 1 pound.
* RC100 Controller Box: 3.5 x 2 x 3.5 inches 7 oz. Black.