Kenwood TH-F6A
Specifications
TH-F6A Specification| GENERAL | |
| Antenna Impedance | 50 ohms (SMA) |
| Current receive battery saver ON | 30-35 mA |
| Current receive with no signals | 100-170 mA |
| Current transmit EL | 0.5 A PB-42L |
| Current transmit H | 2.0 A PB-42L |
| Current transmit L | 0.8 A PB-42L |
| Dimensions [no projections] | 2.3 x 3.4 x 1.2 inches (58 x 87 x 30 mm) (WxHxD) [with PB-42L] |
| Ground | Negative |
| Microphone Impedance | 2 k ohms |
| Anatenna Impedance | 50 ohms SMA |
| Operating Temperature Range | -20°C to +60°C (-4°F to +140°F) |
| Operating Voltage | DC in Jack 13 to 16.0 V (13.8 V)
Battery terminals 5.5 to 7.5 V (7.4V) |
| Weight | 9 oz (250 g) [with PB-42L] |
| RECEIVER | |
| Receive Mode A Band | FM |
| Receive Mode B Band | LSB, USB, CW, AM, FM |
| Receive Range A Band | 137-174, 216-260, 410-470 MHz |
| Receive Range B Band | 0.1-1.8, 1.8-29.7, 29.7-54, 54-108, 108-137, 137-174, 174-216, 216-400, 400-470, 470-806, 806-824, 849-869, 894-1300 MHz. |
| Audio Output Power (10% distortion) | More than 300 mW |
| Circuitry | Double conversion superhet (Single for WFM) |
| Selectivity -6 dB -40 dB |
More than 12 kHz Less than 28 kHz |
| A Band Sensitivity (12 dB SINAD) | Less than 0.18µV |
| Squelch Sensitivity | Less than 0.13µV |
| TRANSMITTER | |
| Transmit Mode | F3E (FM) F2D (FM) |
| Transmit Range 2 M Band | 144-148 MHz |
| Transmit Range 1.25 M Band | 222-225 MHz |
| Transmit Range 70 cm Band | 430-450 MHz |
| Maximum Frequency Deviation | ±5 kHz FM / ±2.5 kHz NFM |
| Modulation | Reactance modulation |
| Modulation Distortion | Less than 3% (300 Hz-3 kHz) |
| RF Output Power H 13.8 VDC PB-42L BT-14 |
5 W 5 W 0.5 W |
| RF Output Power L 13.8 VDC PB-42L BT-14 |
2 W 0.5 W 0.3 W |
| RF Output Power EL 13.8VDC PB-42L BT-14 |
0.5 W 0.05 W 0.05 W |
| Spurious Radiation | Less than -60 dB |
| Specifications may be changed without notice. UR | |
Copyright 2000-2020, Universal Radio, Inc.