Alinco DJ-S40T
Specifications
DJ-S40T Specifications
| GENERAL | |
| Receive Frequency | 400 to 511.995 MHz (F2 F3 only) |
| Transmit Frequency | 430 to 449.995 MHz |
| Tuning Steps | 5, 10, 12.5, 15, 20, 25, 30, 50 kHz |
| Frequency Stability | ± 5ppm (-10° to +60°C.) |
| Antenna Impedance | 50 ohm unbalanced |
| Supply Voltage | DC 13.8V rated (4.5 min to 16V max) |
| Ground | Negative Ground |
| Transmit Current Consumption | 1W 600mA approx. at 13.8V external source |
| Receive Current Consumption | 150 mA (40 ma squelched, 15 ma battery save) |
| Operating Temperature Range | -10° to +60°C. |
| Dimensions (w/o projection) | 2.2 x 4.0 x 1.2 inches inches (56 x 102 x 30 mm with dry cell case) |
| TRANSMITTER | |
| Output power | 1W at 13.8V or with optional EBP-53N battery-pack, 0.5W with dry cell case, Low=0.2W |
| Modulation | Variable reactance FM |
| Max. Deviation | ± 5 kHz |
| Spurious Emission | less than -60db |
| Microphone Impedance | 2k ohms approx. |
| RECEIVER | |
| Circuit | Double conversion superheterodyne |
| 1st IF Frequency | 21.7MHz |
| 2nd IF Frequency | 450 kHz |
| Sensitivity 12db SINAD | 0.20uV or less, better than -14 dBu |
| Selectivity | More than 6 dB/6 kHz, Less than -60 dB/14 kHz |
| AF out at 10% distort. 13.8V | Max 200 mW |
| AF impedance | 8 ohms |
| Specifications are subject to change without notice. |