Alinco DJ-196T
Specifications
DJ-196T Specifications
| GENERAL | |
| Receive Frequency (original status) | 130 to 174 MHz (F2 F3 only) |
| Transmit Frequency | 144 to 147.995 MHz |
| Frequency Stability | ± 5ppm (-10° to +60°C.) |
| Antenna Impedance | 50 ohm unbalanced |
| Supply Voltage | DC 13.8V rated (6.0 min to 16V max) |
| Ground | Negative Ground |
| Transmit Current Consumption (@13 VDC) | 1.2 Amps (5 watts) |
| Receive Current Consumption (@13 VDC) | 200 mA (50 mA squelched, 20 mA battery save) |
| Operating Temperature Range | -10° to +60°C. |
| Dimensions (w/o projection) | 2.2 x 4.9 x 1.6 inches (56x124x40 mm) |
| TRANSMITTER | |
| Output power | 5 W 13.8 V or EBP48N (Low=0.5W) |
| Modulation | Variable reactance |
| Max. Deviation | n/a |
| Spurious Emission | less than -60db |
| Microphone Impedance | 2k ohms approx. |
| RECEIVER | |
| Circuit | Double conversion superheterodyne |
| 1st IF Frequency | 21.7MHz |
| 2nd IF Frequency | 450 kHz |
| Sensitivity 12db SINAD | 0.2uV or less, better than -8 dbu |
| Selectivity except WFM | more than 12 kHz -6db |
| Image/spurious response | <-60db |
| AF out at 10% distort. 13.8V | Max 300 mW |
| AF impedance | 8 ohms |
| Specifications are subject to change without notice. |