I50A FT108 PP30
Wattmeter and
Power Analyzer
Discontinued!

I50A FT108 PP50
Wattmeter and
Power Analyzer
Discontinued!

The 150A is a high precision watt meter and power analyzer. It features a two line backlit display.
This meter will continuously display Amps, Volts and Watts. Other values are displayed sequentially for one second:
Amp hours, Watt hours, Amps peak, Voltage minimum, Watts peak.

By connecting the meter directly to a battery or power source (6-60 VDC) the meter will power itself.

Various connection configurations support load testing, battery charging, etc.
The hook-up and operation couldn't be simpler.
Amp capacity will vary based on duty-cycle, wire gauge, plug capacity, etc.

Features include:
Volts: 0 to 60 volts DC, 0.01V resolution (6-60VDC without optional aux power cable)
Amps: 0 to 150 Amp, 0.01 A resolution (75 Amps continuous, 150 Amps peak)
Watts: 0 to 9000 Watts, 0.01W resolution
Amp-hours: 0 to 65 Ah, 0.001 Ah resolution
Watt-hours: 0 to 6554 Wh, 0.1 Wh resolution
Display Type: High-contrast green backlit LCD
Input/Output: Powerpole® connectors
Size: 3.5 x 1.9 x 1" (85x42x24mm 82 g)

NOTE:
The #5150 I50A FT108 PP30 uses 30 Amp Powerpole® connectors (shown above).
The #5271 I50A FT108 PP50 uses 50 Amp Powerpole® connectors. Click here to VIEW.

WARNING:
High power electrical systems pose many dangers. It is the user’s responsibility to be familiar with these dangers and take any action necessary to ensure safe use. Shorting a battery or battery charger can have serious consequences including explosion, fire, damage to equipment, or personal injury. Exceeding the rated specifications or shorting the watt meter will cause damage to the meter and associated devices.

Powerpole® is a registered trademark of Anderson Power Products, Inc.
Anderson Power Products® is a registered trademark of Anderson Power Products, Inc.