Heil PR30
Proline
Broadcast Mic

  Not in stock  

The Heil PR30 Proline Broadcast Mic is a professional quality dynamic cardioid microphone designed for commercial broadcast, recording and live sound reinforcement applications which require a smooth flat response over a wide frequency response. The PR30 has a comparable sound to the finest condenser microphone because of it's wide frequency response, excellent transient response and low IMD. Following a 20 year Heil tradition, the new PR30 exhibits gorgeous natural speech articulation without having to apply heavy electronic equalization. Truly one of the most natural and pleasant sounding dynamic microphones, ever.

The Heil engineers have created a very rugged microphone with superior low handling noise by mounting the very wide frequency response dynamic element into a special sorbothane shock mount system. This low handling noise and exceptional lack of bass-boosting proximity effect makes it ideal for professional uses.

The PR30 achieves it's exceptional performance by using a special magnet structure and a large aluminum 1 1/8" low mass voice coil assembly. Special attention has been paid to the phasing plug assembly with equally placed ports that sense audio from behind the source entering them out of phase thus producing a very linear cardioid pattern and reduces the proximity effect while achieving the extreme articulation across it's smooth 40 - 18,000 Hz. frequency response. The new Heil 'PROLINE' element is usable in extreme high sound pressure levels and is immune to overload conditions as a condenser usually will be. It produces a beautifully smooth audio response without the inconvenience of phantom or outside d.c. powering.

The Cardioid pattern offers the greatest rejection at 180 degrees off axis which is directly behind the microphone and creates virtually no off-axis coloration while providing the greatest possible rejection of unwanted audio. The PR30 comes with a Heil small mount to facilitate connection to a 5/8 inch 27 standard threaded mic mount. The PR30 does not come with mic cable or mount. The PR30 shown above is in the optional SM2 shock mount and optional cable.

NOTE:
This mic was designed principally for studio and broadcast use. It may also be used for traditional amateur radio applications with the addition of the appropriate XLR cable and HS-2 hand switch or the FS-2 foot switch.

Hearing is believing!   The PR30 was on live display in the Universal Showroom.
     Stop by and hear how your voice sounds through this microphone!
[NOTE: Our showrooom is not open at this time.]

Specifications:
Generating Element: Dynamic with Neodymium magnet structure
Body: Mate Steel body is zinc die cast
Frequency Response: 40 to 18,000 Hz
Impedance: 600 ohms balanced
Connections: Pin 1 Shield ground, Pin 2 + , Pin 3 -
Output Level: -52.9dB @ 1,000 Hz.
Polar Pattern: End fire, Cardioid, uniform front to back discrimination
Diaphragm: Low-mass quilted aluminum
Finish: Anodized champagne matte
Net Weight: 14 oz.

Order #	Photo	Model	Description	List Price	Your Price	Order
		FS-2	Dual foot switch plugs into two of the ¼" jack of the CC-1 (sold separately).	Not in stock
		HS-2	Ergonomic 'Magnum' Handswitch.	Not in stock
		SM-1	Shock mount.	Not in stock
#2443		PRSM-C	Shock mount. Champagne.  INFO	$105.00	$51.98
view Heil Booms, Mounts and Bases