Return to Home Page

RF Systems

120 VAC Adapter

Return to DX-10 Pro




DC30 Mains Adatper

The RF Systems DX-10 Pro does not include the RF Systems AC-30 120 VAC mains adapter shown above. The AC-30 feeds the required 12 VDC current up the coax line to the antenna. This mains adapter does not have an ON/OFF switch as it is intended for continuous use. The adapter is double insulated and does not itself need to be grounded. However, the antenna and/or receiver must be grounded. The short length of coax cable terminating in a PL259 would plug into the receiver. The SO-239 output jack would feed the coax cable (not supplied) going to the antenna.

The AC-30 has a built-in thermal fuse that will cut power to the antenna in the event of a cable short.

Copyright 2004-2018 Universal Radio, Inc.