![]() ![]() |
Wideband Antennas | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() The NTi GA3005 is an extreme wideband active receive antenna that effectively covers 9 kHz to 3 GHz. The NTi CPI3000DP power inserter (shown above right) is included. This inserter accepts the DC power that will travel up the coax cable to power the active antenna element. This device features a BNC antenna jack for coax from the antenna element and a BNC jack output to the receiver. It features a USB-B jack on the left side or a conventional pin jack on the top, for DC power input 5.5-15 VDC (max 120 mA). This antenna system requires a USB A to USB B power cable. This will fasciliate operation from a PC USB power source. The preamp/antenna element may be mounted outdoors if the connector and base of antenna are sealed with a sealant such as Coax-Seal or sealant tape. Made in Germany.
The user must provide:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright 2015-2024, Universal Radio, Inc. |