Return to Home Page

Icom IC-R2-06
Wideband Receiver


Replaced by the

Please check
our Used List


Recently Sold Used

Return to Wideband Receiver Index





Previous Model:

Discontinued Wideband Receivers 
Icom R2

Icom logo



Specifications | Accessories | Larger Photo

The Icom IC-R2 is a miracle of miniaturization. At only 2.3"x3.4"x1" (58x86x27 mm) is it absolutely packed with features. It is especially big on coverage, tuning from 495 kHz to 1309.9 MHz (less cellular) in these modes: AM, FM Narrow and FM wide. The triple conversion circuit provides amazing sensitivity for the size. It has 400 channels of memory (8 banks of 50). Each memory stores: frequency, mode, step size, duplex direction and offset, CTCSS tone, tone squelch and skip settings. Plus you get an additional 50 band-edge memories. You can scan one bank or all banks. Both automatic and manual Squelch are supported and CTCSS decode is built in! Other features include: attenuator, LCD display with lamp, auto power off (30/60/90/120 mins.) and battery save. The efficient circuit operates on just two AA cells. There is a mini headphone jack.

The other thing that is very small about the R2 is it's price! Your R2 comes with two NiCad AA cells, BC127A AA charging tray, flexible SMA antenna, wrist strap and belt clip. Click here for detailed specifications.

The IC-R2-07 model is the same as above, but without the 824-849 / 869-894 MHz cellular gap and could be purchased via government or qualifying commercial purchase order or for export only. This version is also discontinued.

Order # Photo Item Description List Price Your Price Order
    CS R2 DOS PC cloning software on 3.5 inch disk (requires OPC-478). Discontinued
    CS WHHRX Windows 3.1/95/98/ME programming software and cable (DB9) for R2/R10 on 3.5 inch disk. Discontinued
  LC146 LC-146 Carrying case Discontinued
  OPC474 OPC-474 R2 to R2 cloning cable. Not in stock
  OPC478 OPC-478 PC to R2 cloning cable. Discontinued
  Sp13 SP-13 Black mono earphone 3.5 mm plug. Discontinued
#5487   FAS270C Flexible 7 inch antenna. SMA male. [as supplied]. $20.50 $9.98 Order
#0531 SMABNC SMA-BNC This RF adapter lets you connect a BNC type antenna to the R2's SMA antenna jack. $5.95 $3.48 Order
  SMA-SO239 SMA-SO239 Low-loss 4 foot (1.2 m) LMR100 RF adapter cable to safely connect a PL259 type antenna to the SMA antenna jack. Discontinued

Copyright 1999-2023 Universal Radio, Inc.

#2488 00 D000/000 Q000/000 JP 10/23