Return to Home Page

Alinco DJ-X11T
Wideband Receiver

 Not in stock 

Return to Wideband Receiver Index

 

 

Previous Models:
DJ-X2000

Wideband Receivers 

Features | Specifications | Accessories
| Side Controls | Display | Controls

 

Alinco DJ-X11T

Features

The Alinco DJ-X11T wideband receiver covers 50 kHz to 1299.995 MHz (less cellular) in AM, FM wide, FM narrow, SSB and CW modes. The illuminated LCD display supports two lines. In addition to frequency information, it will also show the operating mode, memory channel, battery strength, signal strength and a number of other user-selected operating parameters. The keypad is backlit. Six types of memory banks are supported. The DJ-X11T even supports dual frequency simultaneous reception giving you the ability to concurrently listen with the main band and sub band (with some frequency limitations). Please note that sub band coverage is 118-174 MHz and 336-470 MHz. The F tuning function allows you to automatically tune very strong, nearby signals. The built in MW ferrite bar antennas provides good AM band reception.

The DJ-X11T features 1200 Alphanumeric (up to 16 characters) memory channels. Additional 100 memory channels are available for each Dual-mode memory, Search-pass, Priority monitoring and Programmed Scanning pairs. Three scan speeds are available (VFO: 25ch/s, 33ch/s, 100ch/s, Memory: 4.5ch/s, 8.3ch/s, 20ch/s). Tuning steps are: 0.05/0.1/1/5/6.25/8.33/9/10/12.5/15/20/25/30/50/100/125/150/200/500kHz/1MHz. There is also a very novel IQ signal and IF output feature. The IQ signal output can be used with third-party software (not supplied) to operate as a software defined radio (SDR). The 10.7 MHz IF output can be used with other receiver-related software on the Internet (not supplied). The supplied SMA antenna is removable.

Other features include:  APO Auto Power Off, Attenuator, BS Battery Save function, Beep On/Off, ext DC input jack (5.4-6VDC) and battery-low icon. There is even a Voice-guidance system that reads entering/entered frequency in English. This radio's firmware may be updated over the web (with optional cable and software). One year limited manufacturer's warranty.

This radio comes with the EBP-74 3.7V 1800 mAh lithium ion battery, EDH-36 cell holder, EDC-139 AC adapter, EDC-174 Drop-in Li-ion charging tray, SMA flexible antenna, belt clip and hand strap. 2.4 x 4.17 x 1.5 inches 8.3 oz.

Accessories
Order # Photo Item Description List Price Your Price Order
   EBC23 EBC-23 Belt clip [as supplied]. Not in stock
    EDC-139 Wall adapter to power EDC-174. Not in stock
  EDC-174 EDC-174 Drop-in Li-ion charging tray (requires EDC-139). Not in stock
  EBP-74 EBP-74 Li-Ion Battery pack 3.7V 1800 mAh. Not in stock
  EDH-33 EDH-33 Cigar plug DC conversion cable (12VDC/24VDC to 6 VDC). INFO Not in stock
  EDH-36 EDH-36 Battery holder (3 x AA). Not in stock
  EDS-12 EDS-12 Wired remote for control of basic functions. INFO Not in stock
  ERW4 ERW-4C PC Interface Serial Cable [DB-9F].  Discontinued
#1695 ERW7 ERW-7 PC Interface USB Cable INFO $49.65 $34.98 Order
   ERW8 ERW-8 PC Interface USB Cable Mini type INFO Not in stock
   ESC-50 ESC-50 Vinyl Carrying Case. Out of stock
  SMABNC SMA-BNC This RF adapter lets you connect a BNC type antenna to the SMA antenna jack. Not in stock
   SMA-SO239 SMA-SO239 Low-loss 4 foot (1.2 m) LMR100 RF adapter cable to safely connect a PL259 type antenna to the SMA antenna jack. Not in stock


Copyright 2010-2022 Universal Radio, Inc.

#4011 10-C A[400]350/300 Q160/200 JP 05/22