UG85 Kenwood TS-120S $299.95 SOLD
HF Amateur Transceiver
The Kenwood TS-120S covers the pre-WARC HF bands with over 100 watts. It has a digital and analog display, S-Meter, RIT and NB. The rear panel has antenna input and other jacks. The top panel has the speaker. With original Owner's Manual and DC cord (no mic). [12/06]
 Click here for technical info on this discontinued model |
[ No item ] |
U823 Kenwood TS-130SE $219.95 SOLD
HF Amateur Transceiver
The Kenwood TS-130SE covers the HF bands with over 100 watts. It has a digital and analog display, S-Meter, RIT and NB. The rear panel has antenna input and other jacks. With original Owner's Manual and new PG-2Z DC cord. [06/04]
Click here for technical info on this discontinued model |
U284 Kenwood DFC-230 $69.95 SOLD
Digital Frequency Controller
The Kenwood DFC-230 provides maximum efficiency and flexibility for mobile or fixed operation by providing a 20 Hz step VFO and four memories for the TS-130S/SE/V and TS-830S series transceivers. The rear panel has the hard-wired connections. Includes Up/Down hand mic. The upper left corner is disfigured. [08/05]
Click here for technical info on this discontinued model |
UF27 Kenwood AT-130 $119.95 SOLD
Antenna Tuner
The Kenwood AT-130 covers the 80 through 10 meters bands. This manual antenna tuner matches the TS-130S, TS-130SE and other models. In good condition. The rear panel has SO239 input and output jacks. With photocopy of Owner's Manual and short coax jumper. S/N 5030023. [04/16]
Click here for technical info on this discontinued model |
UI88 Kenwood AT-130 $139.95 SOLD
Antenna Tuner
The Kenwood AT-130 covers the 80 through 10 meters bands. This manual antenna tuner matches the TS-130S, TS-130SE and other models. In good condition. The rear panel has SO239 input and output jacks. 12 VDC red/black wire merely for illumination, if desired. S/N 5030023. [11/19]
Click here for technical info on this discontinued model |
UL13 Kenwood PS-30 $89.95 SOLD
External Power Supply
The Kenwood PS-30 power supply delivers 13.8 VDC at 15 Amps continuous, 20 Amps 50% duty cycle. The rear panel has a hard-wired output cable to standard Kenwood Molex plug and low amperage screw terminals (5A max). In good condition. Includes original Owner's sheet. This power supply matches the TS-120S, TS-130S, TS-130SE and TS-180S. 20 lbs! Can quote shipping. [01/17]
Click here for technical info on this discontinued model |
[ No item ] |
