| [ No item ] |
UJ63 Electrovoice 619TR $39.95
Desk Mic
The ElectroVoice 619TR is an omni-directional desk mic.. This one uses a 2-pin mic plug. The finish is worn on the neck near the PTT button. There is a hand-written note on the bottom stating the mic was fitted with a Model 638 element. [09/14] |
UA53 Electrovoice 638 $129.95 SOLD
Desk Mic
The ElectroVoice 638 desk mic has PTT with LOCK button. It has a 4 pin mic plug. [04/07] |
UM25 Electrovoice 638 $79.95 SOLD
Desk Mic
The ElectroVoice 638 desk mic has PTT with Lock button. This one is fitted with a 1/4 inch, 3 conductor mic plug. The finish has some minor pitting. [09/14] |
UR93 Electro-Voice 638 $69.95 SOLD
Desk Mic
The Electro-Voice 638 is a high impedance, dynamic microphone with heavy base. The PTT bar has a lock. Cable terminates to a 4 conductor mic plug. Made in the U.S.A. [11/17] |
[ No item ] |
UA78 Electrovoice 714 $23.95 SOLD
Hand Mic
The ElectroVoice 714 omnidirectional hand mic has a PTT button. It has a Hi-Z ceramic element with a frequency response of 100-7000 Hz. The coiled 3 conductor cable terminates to a 3/8 inch mic plug. With box and photo-copy of spec. sheet. Made in Buchananan, Michigan. [02/16] |
UF27 Electrovoice 719 $44.95 SOLD
Desk Mic
The ElectroVoice 719 omnidirectional desk mic has a PTT button. It has a Hi-Z ceramic element and 3 conductor 1/4 inch mic plug. 4.5 x 9.75 x 4.75" 2.25 lbs. With spec. sheet. [06/13] |
U349 Electro-Voice 727 $48.95 SOLD
Microphone
The Electro-Voice 727 is a ceramic omnidirectional desk mic. It is mounted on a sturdy diecast desk stand for table-top use. This mic appears to never have been used, and we left the desk stand wrapped. Response 60-8000 Hz. With 8.5 foot shielded cable. Includes box and spec sheet. [12/18]
 Click here for technical info on this discontinued model |
U351 Electro-Voice 727 $48.95 SOLD
Microphone
The Electro-Voice 727 is a ceramic omnidirectional desk mic. It is mounted on a sturdy diecast desk stand for table-top use. This mic appears to never have been used, and we left the desk stand wrapped. Response 60-8000 Hz. With 8.5 foot shielded cable. Includes box and spec sheet. [12/18]
Click here for technical info on this discontinued model |
UC11 Electro-Voice 727 $44.95 SOLD
Microphone
The Electro-Voice 727 is a ceramic omnidirectional desk mic. It is mounted on a sturdy diecast desk stand for table-top use. This mic appears to never have been used, and we left the desk stand wrapped. Response 60-8000 Hz. With 8.5 foot shielded cable. Includes box and spec sheet. [12/18]
Click here for technical info on this discontinued model |
U368 Electro-Voice 729SRD Variant $31.95 SOLD
Microphone
The Electro-Voice 729SRD variant is a ceramic omni directional desk mic. It is mounted on a sturdy diecast desk stand for table-top use. This variant was produced for Ten-Tec/Drake. This one has a Ten-Tec logo. Only in fair with scratches and wear spots noted. Response 60-8000 Hz. With shielded cable to 1/4" phone plug. Includes box and spec sheet. The mic audio is fine, but we note that the PTT lock switch is sticking. [01/19] |
UC10 Electro-Voice 428 $39.95 SOLD
Mic Stand
This Electro-Voice 428 Touch To Talk desk mic stand appears to have not been used. Comes without wiring. Includes box and spec sheet. [12/18]
Click here for technical info on this discontinued model |
U364 Electro-Voice 428 $39.95 SOLD
Mic Stand
This Electro-Voice 428 Touch To Talk desk mic stand appears to have had little or no use. Comes without wiring. Includes worn box and spec sheet. [01/19]
Click here for technical info on this discontinued model |
